Quite a bit of effort has been made to make Mutt the premier text-mode
MIME MUA. Every effort has been made to provide the functionality that
the discerning MIME user requires, and the conformance to the standards
wherever possible. When configuring Mutt for MIME, there are two extra
types of configuration files which Mutt uses. One is the
mime.types
file, which contains the mapping of file extensions to
IANA MIME types. The other is the mailcap
file, which specifies
the external commands to use for handling specific MIME types.
There are three areas/menus in Mutt which deal with MIME, they are the pager (while viewing a message), the attachment menu and the compose menu.
When you select a message from the index and view it in the pager, Mutt
decodes the message to a text representation. Mutt internally supports
a number of MIME types, including text/plain, text/enriched,
message/rfc822, and message/news
. In addition, the export
controlled version of Mutt recognizes a variety of PGP MIME types,
including PGP/MIME and application/pgp.
Mutt will denote attachments with a couple lines describing them. These lines are of the form:
[-- Attachment #1: Description --]
[-- Type: text/plain, Encoding: 7bit, Size: 10000 --]
Where the Description
is the description or filename given for the
attachment, and the Encoding
is one of
7bit/8bit/quoted-printable/base64/binary
.
If Mutt cannot deal with a MIME type, it will display a message like:
[-- image/gif is unsupported (use 'v' to view this part) --]
The default binding for view-attachments
is `v', which displays the
attachment menu for a message. The attachment menu displays a list of
the attachments in a message. From the attachment menu, you can save,
print, pipe, and view attachments. You can apply these operations to a
group of attachments at once, by tagging the attachments and by using
the ``tag-prefix'' operator. You can also reply to the current message
from this menu, and only the current attachment (or the attachments
tagged) will be quoted in your reply. You can view attachments as text,
or view them using the mailcap viewer definition. See the help on the
attachment menu for more information.
The compose menu is the menu you see before you send a message. It allows you to edit the recipient list, the subject, and other aspects of your message. It also contains a list of the attachments of your message, including the main body. From this menu, you can print, copy, filter, pipe, edit, compose, review, and rename an attachment or a list of tagged attachments. You can also modifying the attachment information, notably the type, encoding and description.
Attachments appear as follows:
- 1 [text/plain, 7bit, 1K] /tmp/mutt-euler-8082-0 <no description> 2 [applica/x-gunzip, base64, 422K] ~/src/mutt-0.85.tar.gz <no description>
The '-' denotes that Mutt will delete the file after sending the
message. It can be toggled with the toggle-unlink
command
(default: u). The next field is the MIME content-type, and can be
changed with the edit-type
command (default: ^T). The next field
is the encoding for the attachment, which allows a binary message to
be encoded for transmission on 7bit links. It can be changed with the
edit-encoding
command (default: ^E). The next field is the size
of the attachment, rounded to kilobytes or megabytes. The next field
is the filename, which can be changed with the rename-file
command
(default: R). The final field is the description of the attachment, and
can be changed with the edit-description
command (default: d).
mime.types
When you add an attachment to your mail message, Mutt searches your
personal mime.types file at ${HOME}/.mime.types
, and then
the system mime.types file at SHAREDIR/mime.types
.
SHAREDIR
is defined at compilation time, and can be determined
by typing mutt -v
from the command line.
The mime.types file consist of lines containing a MIME type and a space separated list of extensions. For example:
application/postscript ps eps
application/pgp pgp
audio/x-aiff aif aifc aiff
A sample mime.types
file comes with the Mutt distribution, and
should contain most of the MIME types you are likely to use.
If Mutt can not determine the mime type by the extension of the file you
attach, it will look at the file. If the file is free of binary
information, Mutt will assume that the file is plain text, and mark it
as text/plain
. If the file contains binary information, then Mutt will
mark it as application/octect-stream
. You can change the MIME
type that Mutt assigns to an attachment by using the edit-type
command from the compose menu (default: ^T). When typing in the MIME
type, Mutt requires that major type be one of the 5 types: application,
text, image, video, or audio. If you attempt to use a different major
type, Mutt will abort the change.
mailcap
Mutt supports RFC 1524 MIME Configuration, in particular the Unix specific format specified in Appendix A of RFC 1524. This file format is commonly refered to as the mailcap format. Many MIME compliant programs utilize the mailcap format, allowing you to specify handling for all MIME types in one place for all programs. Programs known to use this format include Netscape, MosaicX, lynx and metamail.
In order to handle various MIME types that Mutt can not handle internally, Mutt parses a series of external configuration files to find an external handler. The default search string for these files is a colon delimited list set to
${HOME}/.mailcap:SHAREDIR/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap
where $HOME
is your home directory and SHAREDIR
is the
shared directory defined at compile time (visible from mutt -v
).
In particular, the metamail distribution will install a mailcap file,
usually as /usr/local/etc/mailcap
, which contains some baseline
entries.
A mailcap file consists of a series of lines which are comments, blank, or definitions.
A comment line consists of a # character followed by anything you want.
A blank line is blank.
A definition line consists of a content type, a view command, and any number of optional fields. Each field of a definition line is divided by a semicolon ';' character.
The content type is specified in the MIME standard type/subtype method.
For example,
text/plain, text/html, image/gif,
etc. In addition, the mailcap format includes two formats for
wildcards, one using the special '*' subtype, the other is the implicit
wild, where you only include the major type. For example, image/*
, or
video,
will match all image types and video types,
respectively.
The view command is a Unix command for viewing the type specified. There are two different types of commands supported. The default is to send the body of the MIME message to the command on stdin. You can change this behaviour by using %s as a parameter to your view command. This will cause Mutt to save the body of the MIME message to a temporary file, and then call the view command with the %s replaced by the name of the temporary file. In both cases, Mutt will turn over the terminal to the view program until the program quits, at which time Mutt will remove the temporary file if it exists.
So, in the simplest form, you can send a text/plain message to the external pager more on stdin:
text/plain; more
Or, you could send the message as a file:
text/plain; more %s
Perhaps you would like to use lynx to interactively view a text/html
message:
text/html; lynx %s
In this case, lynx does not support viewing a file from stdin, so you
must use the %s syntax.
Note: Some older versions of lynx contain a bug where they
will check the mailcap file for a viewer for text/html. They will find
the line which calls lynx, and run it. This causes lynx to continously
spawn itself to view the object.
On the other hand, maybe you don't want to use lynx interactively, you just want to have it convert the text/html to text/plain, then you can use:
text/html; lynx -dump %s | more
Perhaps you wish to use lynx to view text/html files, and a pager on all other text formats, then you would use the following:
text/html; lynx %s
text/*; more
This is the simplest form of a mailcap file.
In addition to the required content-type and view command fields, you can add semi-colon ';' separated fields to set flags and other options. Mutt recognizes the following optional fields:
This flag tells Mutt that the command passes possibly large amounts of
text on stdout. This causes Mutt to invoke a pager (either the internal
pager or the external pager defined by the pager variable) on the output
of the view command. Without this flag, Mutt assumes that the command
is interactive. One could use this to replace the pipe to more
in the lynx -dump
example in the Basic section:
text/html; lynx -dump %s ; copiousoutput
This will cause lynx to format the text/html output as text/plain
and Mutt will use your standard pager to display the results.
Mutt uses this flag when viewing attachments with autoview, in order to decide whether it should honor the setting of the $wait_key variable or not. When an attachment is viewed using an interactive program, and the corresponding mailcap entry has a needsterminal flag, Mutt will use $wait_key and the exit status of the program to decide if it will ask you to press a key after the external program has exited. In all other situations it will not prompt you for a key.
Mutt recognizes this flag, but doesn't currently use it, instead calling the edit command to create messages instead.
This flag specifies the command to use to print a specific MIME type. Mutt supports this from the attachment and compose menus.
This flag specifies the command to use to edit a specific MIME type. Mutt supports this from the compose menu, and also uses it to compose new attachments. Mutt will default to the defined editor for text attachmments.
This field specifies the format for the file denoted by %s in the
command fields. Certain programs will require a certain file extension,
for instance, to correctly view a file. For instance, lynx will only
interpret a file as text/html
if the file ends in .html
.
So, you would specify lynx as a text/html
viewer with a line in
the mailcap file like:
text/html; lynx %s; nametemplate=%s.html
This field specifies a command to run to test whether this mailcap entry should be used. The command is defined with the command expansion rules defined in the next section. If the command returns 0, then the test passed, and Mutt uses this entry. If the command returns non-zero, then the test failed, and Mutt continues searching for the right entry. Note: the content-type must match before Mutt performs the test. For example:
text/html; netscape -remote 'openURL(%s)' ; test=RunningX
text/html; lynx %s
In this example, Mutt will run the program RunningX which will return 0
if the X Window manager is running, and non-zero if it isn't. If
RunningX returns 0, then Mutt will call netscape to display the
text/html object. If RunningX doesn't return 0, then Mutt will go on
to the next entry and use lynx to display the text/html object.
When searching for an entry in the mailcap file, Mutt will search for
the most useful entry for its purpose. For instance, if you are
attempting to print an image/gif
, and you have the following
entries in your mailcap file, Mutt will search for an entry with the
print command:
image/*; xv %s
image/gif; ; print= anytopnm %s | pnmtops | lpr; \
nametemplate=%s.gif
Mutt will skip the image/*
entry and use the image/gif
entry with the print command.
In addition, you can use this with Autoview to denote two commands for viewing an attachment, one to be viewed automatically, the other to be viewed interactively from the attachment menu. In addition, you can then use the test feature to determine which viewer to use interactively depending on your environment.
text/html; netscape -remote 'openURL(%s)' ; test=RunningX
text/html; lynx %s; nametemplate=%s.html
text/html; lynx -dump %s; nametemplate=%s.html; copiousoutput
For
Autoview, Mutt will choose the third
entry because of the copiousoutput tag. For interactive viewing, Mutt
will run the program RunningX to determine if it should use the first
entry. If the program returns non-zero, Mutt will use the second entry
for interactive viewing.
The various commands defined in the mailcap files are passed to the
/bin/sh
shell using the system() function. Before the
command is passed to /bin/sh -c
, it is parsed to expand
various special parameters with information from Mutt. The keywords
Mutt expands are:
As seen in the basic mailcap section, this variable is expanded to a filename specified by the calling program. This file contains the body of the message to view/print/edit or where the composing program should place the results of composition. In addition, the use of this keyword causes Mutt to not pass the body of the message to the view/print/edit program on stdin.
Mutt will expand %t to the text representation of the content
type of the message in the same form as the first parameter of the
mailcap definition line, ie text/html
or
image/gif
.
Mutt will expand this to the value of the specified parameter from the Content-Type: line of the mail message. For instance, if Your mail message contains:
Content-Type: text/plain; charset=iso-8859-1
then Mutt will expand %{charset} to iso-8859-1. The default metamail
mailcap file uses this feature to test the charset to spawn an xterm
using the right charset to view the message.
This will be replaced by a %
This mailcap file is fairly simple and standard:
# I'm always running X :) video/*; xanim %s > /dev/null image/*; xv %s > /dev/null # I'm always running netscape (if my computer had more memory, maybe) text/html; netscape -remote 'openURL(%s)'
This mailcap file shows quite a number of examples:
# Use xanim to view all videos Xanim produces a header on startup, # send that to /dev/null so I don't see it video/*; xanim %s > /dev/null # Send html to a running netscape by remote text/html; netscape -remote 'openURL(%s)'; test=RunningNetscape # If I'm not running netscape but I am running X, start netscape on the # object text/html; netscape %s; test=RunningX # Else use lynx to view it as text text/html; lynx %s # This version would convert the text/html to text/plain text/html; lynx -dump %s; copiousoutput # enriched.sh converts text/enriched to text/html and then uses # lynx -dump to convert it to text/plain text/enriched; enriched.sh ; copiousoutput # I use enscript to print text in two columns to a page text/*; more %s; print=enscript -2Gr %s # Netscape adds a flag to tell itself to view jpegs internally image/jpeg;xv %s; x-mozilla-flags=internal # Use xv to view images if I'm running X # In addition, this uses the \ to extend the line and set my editor # for images image/*;xv %s; test=RunningX; \ edit=xpaint %s # Convert images to text using the netpbm tools image/*; (anytopnm %s | pnmscale -xysize 80 46 | ppmtopgm | pgmtopbm | pbmtoascii -1x2 ) 2>&1 ; copiousoutput # Send excel spreadsheets to my NT box application/ms-excel; open.pl %s
In addition to explicitly telling Mutt to view an attachment with the MIME viewer defined in the mailcap file, Mutt has support for automatically viewing MIME attachments while in the pager.
To work, you must define a viewer in the mailcap file which uses the
copiousoutput
option to denote that it is non-interactive.
Usually, you also use the entry to convert the attachment to a text
representation which you can view in the pager.
You then use the auto_view
muttrc command to list the
content-types that you wish to view automatically.
For instance, if you set auto_view to:
auto_view text/html text/enriched application/x-gunzip application/postscript image/gif application/x-tar-gz
Mutt could use the following mailcap entries to automatically view attachmments of these types.
text/html; lynx -dump %s; copiousoutput; nametemplate=%s.html
text/enriched; enriched.sh ; copiousoutput
image/*; anytopnm %s | pnmscale -xsize 80 -ysize 50 | ppmtopgm | pgmtopbm | pbmtoascii ; copiousoutput
application/x-gunzip; gzcat; copiousoutput
application/x-tar-gz; gunzip -c %s | tar -tf - ; copiousoutput
application/postscript; ps2ascii %s; copiousoutput